My Dear Monks,
I have tried over and over to make this work.
I've combed this site and others and see many folks have run into this same issue but I just don't see how to resolve it. I've successfully installed perl 5.20 on this system but am told I need to upgrade to 5.30 for security reasons. My installation almost couldn't be simpler. I'm installing perl 5.30.3 on RHEL 4 Nahant. My Configure looks like this:
./Configure -des -Dprefix=/home/rg8239/perl -Dcc=gcc
The perl works fine. Here's the "perl -V" output:
Summary of my perl5 (revision 5 version 30 subversion 3) configuration
+:
Platform:
osname=linux
osvers=2.6.9-34.elsmp
archname=x86_64-linux
uname='linux gcp4al16 2.6.9-34.elsmp #1 smp fri feb 24 16:56:28 es
+t 2006 x86_64 x86_64 x86_64 gnulinux '
config_args='-des -Dprefix=/home/rg8239/perl -Dcc=gcc'
hint=recommended
useposix=true
d_sigaction=define
useithreads=undef
usemultiplicity=undef
use64bitint=define
use64bitall=define
uselongdouble=undef
usemymalloc=n
default_inc_excludes_dot=define
bincompat5005=undef
Compiler:
cc='gcc'
ccflags ='-fno-strict-aliasing -pipe -I/usr/local/include -D_LARGE
+FILE_SOURCE -D_FILE_OFFSET_BITS=64'
optimize='-O2'
cppflags='-fno-strict-aliasing -pipe -I/usr/local/include'
ccversion=''
gccversion='3.4.5 20051201 (Red Hat 3.4.5-2)'
gccosandvers=''
intsize=4
longsize=8
ptrsize=8
doublesize=8
byteorder=12345678
doublekind=3
d_longlong=define
longlongsize=8
d_longdbl=define
longdblsize=16
longdblkind=3
ivtype='long'
ivsize=8
nvtype='double'
nvsize=8
Off_t='off_t'
lseeksize=8
alignbytes=8
prototype=define
Linker and Libraries:
ld='gcc'
ldflags =' -L/usr/local/lib'
libpth=/usr/local/lib /usr/lib /lib /lib64 /usr/lib64 /usr/local/l
+ib64
libs=-lpthread -lnsl -lgdbm -ldb -ldl -lm -lcrypt -lutil -lc
perllibs=-lpthread -lnsl -ldl -lm -lcrypt -lutil -lc
libc=libc-2.3.4.so
so=so
useshrplib=false
libperl=libperl.a
gnulibc_version='2.3.4'
Dynamic Linking:
dlsrc=dl_dlopen.xs
dlext=so
d_dlsymun=undef
ccdlflags='-Wl,-E'
cccdlflags='-fPIC'
lddlflags='-shared -O2 -L/usr/local/lib'
Characteristics of this binary (from libperl):
Compile-time options:
HAS_TIMES
PERLIO_LAYERS
PERL_COPY_ON_WRITE
PERL_DONT_CREATE_GVSV
PERL_MALLOC_WRAP
PERL_OP_PARENT
PERL_PRESERVE_IVUV
USE_64_BIT_ALL
USE_64_BIT_INT
USE_LARGE_FILES
USE_LOCALE
USE_LOCALE_COLLATE
USE_LOCALE_CTYPE
USE_LOCALE_NUMERIC
USE_LOCALE_TIME
USE_PERLIO
USE_PERL_ATOF
Built under linux
Compiled at Jun 18 2020 02:25:18
@INC:
/home/rg8239/perl/lib/site_perl/5.30.3/x86_64-linux
/home/rg8239/perl/lib/site_perl/5.30.3
/home/rg8239/perl/lib/5.30.3/x86_64-linux
/home/rg8239/perl/lib/5.30.3
Now I try to install my first module, List::MoreUtils It fails with :
XS.c: loadable library and perl binaries are mismatched (got handshake
+ key 0xc100000, needed 0xc180000)
Here's the cpan install output (redundant lines and most comments omitted):
Reading '/home/rg8239/.cpan/Metadata'
Database was generated on Fri, 19 Jun 2020 20:17:02 GMT
Running install for module 'List::MoreUtils'
Checksum for /home/rg8239/.cpan/sources/authors/id/R/RE/REHSACK/List-M
+oreUtils-0.428.tar.gz ok
/bin/tar: Read 6144 bytes from -
'YAML' not installed, will not store persistent state
Configuring R/RE/REHSACK/List-MoreUtils-0.428.tar.gz with Makefile.PL
Checking whether pureperl is required... no
Checking for cc... gcc
Checking for cc... (cached) gcc
Checking whether perlapi is accessible... Warning: prerequisite Export
+er::Tiny 0.038 not found.
Warning: prerequisite List::MoreUtils::XS 0.426 not found.
yes
Checking if your kit is complete...
Looks good
Generating a Unix-style Makefile
Writing Makefile for List::MoreUtils
Writing MYMETA.yml and MYMETA.json
REHSACK/List-MoreUtils-0.428.tar.gz
/home/rg8239/perl/bin/perl Makefile.PL -- OK
Running make for R/RE/REHSACK/List-MoreUtils-0.428.tar.gz
---- Unsatisfied dependencies detected during ----
---- REHSACK/List-MoreUtils-0.428.tar.gz ----
Exporter::Tiny [requires]
List::MoreUtils::XS [requires]
Test::LeakTrace [build_requires]
Running install for module 'Exporter::Tiny'
Checksum for /home/rg8239/.cpan/sources/authors/id/T/TO/TOBYINK/Export
+er-Tiny-1.002002.tar.gz ok
/bin/tar: Read 1536 bytes from -
Configuring T/TO/TOBYINK/Exporter-Tiny-1.002002.tar.gz with Makefile.P
+L
Checking if your kit is complete...
Looks good
Generating a Unix-style Makefile
Writing Makefile for Exporter::Tiny
Writing MYMETA.yml and MYMETA.json
TOBYINK/Exporter-Tiny-1.002002.tar.gz
/home/rg8239/perl/bin/perl Makefile.PL -- OK
Running make for T/TO/TOBYINK/Exporter-Tiny-1.002002.tar.gz
---- Unsatisfied dependencies detected during ----
---- TOBYINK/Exporter-Tiny-1.002002.tar.gz ----
Test::Fatal [build_requires,optional]
Test::Warnings [build_requires,optional]
cp lib/Exporter/Tiny.pm blib/lib/Exporter/Tiny.pm
cp lib/Exporter/Shiny.pm blib/lib/Exporter/Shiny.pm
cp lib/Exporter/Tiny/Manual/Etc.pod blib/lib/Exporter/Tiny/Manual/Etc.
+pod
cp lib/Exporter/Tiny/Manual/Importing.pod blib/lib/Exporter/Tiny/Manua
+l/Importing.pod
cp lib/Exporter/Tiny/Manual/QuickStart.pod blib/lib/Exporter/Tiny/Manu
+al/QuickStart.pod
cp lib/Exporter/Tiny/Manual/Exporting.pod blib/lib/Exporter/Tiny/Manua
+l/Exporting.pod
Manifying 6 pod documents
TOBYINK/Exporter-Tiny-1.002002.tar.gz
/usr/bin/make -- OK
Running make test for TOBYINK/Exporter-Tiny-1.002002.tar.gz
PERL_DL_NONLAZY=1 "/home/rg8239/perl/bin/perl" "-MExtUtils::Command::M
+M" "-MTest::Harness" "-e" "undef *Test::Harness::Switches; tes
t_harness(0, 'inc', 'blib/lib', 'blib/arch')" t/*.t
# Perl 5.030003
t/01basic.t .............. ok
t/02renaming.t ........... ok
t/03generators.t ......... ok
t/04into.t ............... ok
t/05shiny.t .............. ok
t/06notwant.t ............ ok
t/07regexp.t ............. ok
t/08tags.t ............... ok
t/09warnings.t ........... skipped: test requires Test::Warnings and T
+est::Fatal
t/10no.t ................. ok
t/11noncode.t ............ ok
t/12noncodegenerators.t .. ok
t/13doesntexist.t ........ ok
All tests successful.
Files=13, Tests=64, 1 wallclock secs ( 0.07 usr 0.03 sys + 1.21 cus
+r 0.20 csys = 1.51 CPU)
Result: PASS
TOBYINK/Exporter-Tiny-1.002002.tar.gz
/usr/bin/make test -- OK
Running make install for TOBYINK/Exporter-Tiny-1.002002.tar.gz
Manifying 6 pod documents
Installing /home/rg8239/perl/lib/site_perl/5.30.3/Exporter/Shiny.pm
Installing /home/rg8239/perl/lib/site_perl/5.30.3/Exporter/Tiny.pm
Installing /home/rg8239/perl/lib/site_perl/5.30.3/Exporter/Tiny/Manual
+/Exporting.pod
Installing /home/rg8239/perl/lib/site_perl/5.30.3/Exporter/Tiny/Manual
+/QuickStart.pod
Installing /home/rg8239/perl/lib/site_perl/5.30.3/Exporter/Tiny/Manual
+/Etc.pod
Installing /home/rg8239/perl/lib/site_perl/5.30.3/Exporter/Tiny/Manual
+/Importing.pod
Installing /home/rg8239/perl/man/man3/Exporter::Tiny::Manual::Exportin
+g.3
Installing /home/rg8239/perl/man/man3/Exporter::Tiny::Manual::Etc.3
Installing /home/rg8239/perl/man/man3/Exporter::Tiny.3
Installing /home/rg8239/perl/man/man3/Exporter::Tiny::Manual::QuickSta
+rt.3
Installing /home/rg8239/perl/man/man3/Exporter::Shiny.3
Installing /home/rg8239/perl/man/man3/Exporter::Tiny::Manual::Importin
+g.3
Appending installation info to /home/rg8239/perl/lib/5.30.3/x86_64-lin
+ux/perllocal.pod
TOBYINK/Exporter-Tiny-1.002002.tar.gz
/usr/bin/make install -- OK
Running install for module 'Test::Warnings'
Checksum for /home/rg8239/.cpan/sources/authors/id/E/ET/ETHER/Test-War
+nings-0.030.tar.gz ok
/bin/tar: Read 2048 bytes from -
Configuring E/ET/ETHER/Test-Warnings-0.030.tar.gz with Makefile.PL
Checking if your kit is complete...
Looks good
Generating a Unix-style Makefile
Writing Makefile for Test::Warnings
Writing MYMETA.yml and MYMETA.json
ETHER/Test-Warnings-0.030.tar.gz
/home/rg8239/perl/bin/perl Makefile.PL -- OK
Running make for E/ET/ETHER/Test-Warnings-0.030.tar.gz
cp lib/Test/Warnings.pm blib/lib/Test/Warnings.pm
Manifying 1 pod document
ETHER/Test-Warnings-0.030.tar.gz
/usr/bin/make -- OK
Running make test for ETHER/Test-Warnings-0.030.tar.gz
PERL_DL_NONLAZY=1 "/home/rg8239/perl/bin/perl" "-MExtUtils::Command::M
+M" "-MTest::Harness" "-e" "undef *Test::Harness::Switches; tes
t_harness(0, 'blib/lib', 'blib/arch')" t/*.t
#
# Versions for all modules listed in MYMETA.json (including optional o
+nes):
# REST OF COMMENTS REMOVED FOR BREVITY
#
t/00-report-prereqs.t ................. ok
t/01-basic.t .......................... ok
t/02-done_testing.t ................... ok
t/03-subtest.t ........................ ok
t/04-no-tests.t ....................... ok
t/05-no-end-block.t ................... ok
t/06-skip-all.t ....................... skipped: Need Does::Not::Exist
+::627351373042078 to continue!
t/07-no_plan.t ........................ ok
t/08-use-if.t ......................... ok
t/09-warnings-contents.t .............. ok
t/10-no-done_testing.t ................ ok
t/11-double-use.t ..................... ok
t/12-no-newline.t ..................... ok
t/13-propagate-warnings.t ............. ok
t/14-propagate-subname.t .............. ok
t/15-propagate-default.t .............. ok
t/16-propagate-ignore.t ............... ok
t/17-propagate-subname-colons.t ....... ok
t/18-propagate-subname-package.t ...... ok
t/19-propagate-nonexistent-subname.t .. ok
t/20-propagate-stub.t ................. ok
t/21-fail-on-warning.t ................ ok
t/22-warnings-bareword.t .............. ok
t/23-report-warnings.t ................ ok
t/zzz-check-breaks.t .................. ok
All tests successful.
Files=25, Tests=81, 4 wallclock secs ( 0.13 usr 0.04 sys + 3.00 cus
+r 0.53 csys = 3.70 CPU)
Result: PASS
ETHER/Test-Warnings-0.030.tar.gz
/usr/bin/make test -- OK
Running make install for ETHER/Test-Warnings-0.030.tar.gz
Manifying 1 pod document
Installing /home/rg8239/perl/lib/site_perl/5.30.3/Test/Warnings.pm
Installing /home/rg8239/perl/man/man3/Test::Warnings.3
Appending installation info to /home/rg8239/perl/lib/5.30.3/x86_64-lin
+ux/perllocal.pod
ETHER/Test-Warnings-0.030.tar.gz
/usr/bin/make install -- OK
Running install for module 'Test::Fatal'
Checksum for /home/rg8239/.cpan/sources/authors/id/R/RJ/RJBS/Test-Fata
+l-0.014.tar.gz ok
Configuring R/RJ/RJBS/Test-Fatal-0.014.tar.gz with Makefile.PL
Warning: prerequisite Try::Tiny 0.07 not found.
Checking if your kit is complete...
Looks good
Generating a Unix-style Makefile
Writing Makefile for Test::Fatal
Writing MYMETA.yml and MYMETA.json
RJBS/Test-Fatal-0.014.tar.gz
/home/rg8239/perl/bin/perl Makefile.PL -- OK
Running make for R/RJ/RJBS/Test-Fatal-0.014.tar.gz
---- Unsatisfied dependencies detected during ----
---- RJBS/Test-Fatal-0.014.tar.gz ----
Try::Tiny [requires]
Running install for module 'Try::Tiny'
Checksum for /home/rg8239/.cpan/sources/authors/id/E/ET/ETHER/Try-Tiny
+-0.30.tar.gz ok
Configuring E/ET/ETHER/Try-Tiny-0.30.tar.gz with Makefile.PL
Checking if your kit is complete...
Looks good
Generating a Unix-style Makefile
Writing Makefile for Try::Tiny
Writing MYMETA.yml and MYMETA.json
ETHER/Try-Tiny-0.30.tar.gz
/home/rg8239/perl/bin/perl Makefile.PL -- OK
Running make for E/ET/ETHER/Try-Tiny-0.30.tar.gz
cp lib/Try/Tiny.pm blib/lib/Try/Tiny.pm
Manifying 1 pod document
ETHER/Try-Tiny-0.30.tar.gz
/usr/bin/make -- OK
Running make test for ETHER/Try-Tiny-0.30.tar.gz
PERL_DL_NONLAZY=1 "/home/rg8239/perl/bin/perl" "-MExtUtils::Command::M
+M" "-MTest::Harness" "-e" "undef *Test::Harness::Switches; tes
t_harness(0, 'blib/lib', 'blib/arch')" t/*.t
#
# Versions for all modules listed in MYMETA.json (including optional o
+nes):
#
# === Configure Requires ===
#
# Module Want Have
# ------------------- ---- ----
# ExtUtils::MakeMaker any 7.34
#
# REST OF COMMENTS REMOVED FOR BREVITY
#
t/00-report-prereqs.t .......... ok
t/basic.t ...................... ok
t/context.t .................... ok
t/erroneous_usage.t ............ ok
t/finally.t .................... ok
t/given_when.t ................. skipped: Tests skipped on perl 5.27.7
++, pending resolution of smartmatch changes
t/global_destruction_forked.t .. ok
t/global_destruction_load.t .... skipped: Capture::Tiny 0.12 required
t/named.t ...................... ok
t/when.t ....................... skipped: Tests skipped on perl 5.27.7
++, pending resolution of smartmatch changes
t/zzz-check-breaks.t ........... ok
All tests successful.
Files=11, Tests=97, 2 wallclock secs ( 0.06 usr 0.03 sys + 1.43 cus
+r 0.20 csys = 1.72 CPU)
Result: PASS
ETHER/Try-Tiny-0.30.tar.gz
/usr/bin/make test -- OK
Running make install for ETHER/Try-Tiny-0.30.tar.gz
Manifying 1 pod document
Installing /home/rg8239/perl/lib/site_perl/5.30.3/Try/Tiny.pm
Installing /home/rg8239/perl/man/man3/Try::Tiny.3
Appending installation info to /home/rg8239/perl/lib/5.30.3/x86_64-lin
+ux/perllocal.pod
ETHER/Try-Tiny-0.30.tar.gz
/usr/bin/make install -- OK
RJBS/Test-Fatal-0.014.tar.gz
Has already been unwrapped into directory /home/rg8239/.cpan/build/T
+est-Fatal-0.014-2
RJBS/Test-Fatal-0.014.tar.gz
Has already been prepared
Running make for R/RJ/RJBS/Test-Fatal-0.014.tar.gz
cp lib/Test/Fatal.pm blib/lib/Test/Fatal.pm
Manifying 1 pod document
RJBS/Test-Fatal-0.014.tar.gz
/usr/bin/make -- OK
Running make test for RJBS/Test-Fatal-0.014.tar.gz
PERL_DL_NONLAZY=1 "/home/rg8239/perl/bin/perl" "-MExtUtils::Command::M
+M" "-MTest::Harness" "-e" "undef *Test::Harness::Switches; tes
t_harness(0, 'blib/lib', 'blib/arch')" t/*.t
#
# Versions for all modules listed in MYMETA.json (including optional o
+nes):
#
# REST OF COMMENTS REMOVED FOR BREVITY
#
t/00-report-prereqs.t .. ok
t/basic.t .............. ok
t/like-exception.t ..... ok
t/todo.t ............... ok
All tests successful.
Files=4, Tests=16, 1 wallclock secs ( 0.05 usr 0.02 sys + 0.68 cusr
+ 0.10 csys = 0.85 CPU)
Result: PASS
RJBS/Test-Fatal-0.014.tar.gz
/usr/bin/make test -- OK
Running make install for RJBS/Test-Fatal-0.014.tar.gz
Manifying 1 pod document
Installing /home/rg8239/perl/lib/site_perl/5.30.3/Test/Fatal.pm
Installing /home/rg8239/perl/man/man3/Test::Fatal.3
Appending installation info to /home/rg8239/perl/lib/5.30.3/x86_64-lin
+ux/perllocal.pod
RJBS/Test-Fatal-0.014.tar.gz
/usr/bin/make install -- OK
Running install for module 'List::MoreUtils::XS'
Checksum for /home/rg8239/.cpan/sources/authors/id/R/RE/REHSACK/List-M
+oreUtils-XS-0.428.tar.gz ok
/bin/tar: Read 7680 bytes from -
Configuring R/RE/REHSACK/List-MoreUtils-XS-0.428.tar.gz with Makefile.
+PL
Checking whether pureperl is required... no
Checking for cc... gcc
Checking for cc... (cached) gcc
Checking whether perlapi is accessible... yes
Checking for stdlib.h... yes
Checking for stdarg.h... yes
Checking for string.h... yes
Checking for float.h... yes
Checking for assert.h... yes
Checking for ctype.h... yes
Checking for errno.h... yes
Checking for limits.h... yes
Checking for locale.h... yes
Checking for math.h... yes
Checking for setjmp.h... yes
Checking for signal.h... yes
Checking for stddef.h... yes
Checking for stdio.h... yes
Checking for time.h... yes
Checking for sys/types.h... yes
Checking for sys/stat.h... yes
Checking for memory.h... yes
Checking for strings.h... yes
Checking for inttypes.h... yes
Checking for stdint.h... yes
Checking for unistd.h... yes
Checking for time.h... (cached) yes
Checking for sys/time.h... yes
Checking for time... yes
Checking for size_t... yes
Checking for ssize_t... yes
Checking for builtin expect... no
Checking for statement expression feature... no
Checking if your kit is complete...
Looks good
Generating a Unix-style Makefile
Writing Makefile for List::MoreUtils::XS
Writing MYMETA.yml and MYMETA.json
REHSACK/List-MoreUtils-XS-0.428.tar.gz
/home/rg8239/perl/bin/perl Makefile.PL -- OK
Running make for R/RE/REHSACK/List-MoreUtils-XS-0.428.tar.gz
---- Unsatisfied dependencies detected during ----
---- REHSACK/List-MoreUtils-XS-0.428.tar.gz ----
Test::LeakTrace [build_requires,optional]
cp lib/List/MoreUtils/XS.pm blib/lib/List/MoreUtils/XS.pm
Running Mkbootstrap for XS ()
chmod 644 "XS.bs"
"/home/rg8239/perl/bin/perl" -MExtUtils::Command::MM -e 'cp_nonempty'
+-- XS.bs blib/arch/auto/List/MoreUtils/XS/XS.bs 644
"/home/rg8239/perl/bin/perl" "/home/rg8239/perl/lib/5.30.3/ExtUtils/xs
+ubpp" -typemap '/home/rg8239/perl/lib/5.30.3/ExtUtils/typemap
' XS.xs > XS.xsc
mv XS.xsc XS.c
gcc -c -I. -fno-strict-aliasing -pipe -I/usr/local/include -D_LARGEFI
+LE_SOURCE -D_FILE_OFFSET_BITS=64 -O2 -DVERSION=\"0.428\" -DX
S_VERSION=\"0.428\" -fPIC "-I/home/rg8239/perl/lib/5.30.3/x86_64-linux
+/CORE" XS.c
rm -f blib/arch/auto/List/MoreUtils/XS/XS.so
gcc -shared -O2 -L/usr/local/lib XS.o -o blib/arch/auto/List/MoreUt
+ils/XS/XS.so \
\
chmod 755 blib/arch/auto/List/MoreUtils/XS/XS.so
Manifying 1 pod document
REHSACK/List-MoreUtils-XS-0.428.tar.gz
/usr/bin/make -- OK
Running make test for REHSACK/List-MoreUtils-XS-0.428.tar.gz
"/home/rg8239/perl/bin/perl" -MExtUtils::Command::MM -e 'cp_nonempty'
+-- XS.bs blib/arch/auto/List/MoreUtils/XS/XS.bs 644
PERL_DL_NONLAZY=1 "/home/rg8239/perl/bin/perl" "-MExtUtils::Command::M
+M" "-MTest::Harness" "-e" "undef *Test::Harness::Switches; tes
t_harness(0, 'blib/lib', 'blib/arch')" t/*.t t/xs/*.t xt/*.t
XS.c: loadable library and perl binaries are mismatched (got handshake
+ key 0xc100000, needed 0xc180000)
t/xs/after.t ................
Dubious, test returned 1 (wstat 256, 0x100)
No subtests run
XS.c: loadable library and perl binaries are mismatched (got handshake
+ key 0xc100000, needed 0xc180000)
t/xs/after_incl.t ...........
Dubious, test returned 1 (wstat 256, 0x100)
No subtests run
XS.c: loadable library and perl binaries are mismatched (got handshake
+ key 0xc100000, needed 0xc180000)
t/xs/all.t ..................
Dubious, test returned 1 (wstat 256, 0x100)
No subtests run
Test Summary Report
-------------------
t/xs/after.t (Wstat: 256 Tests: 0 Failed: 0)
Non-zero exit status: 1
Parse errors: No plan found in TAP output
t/xs/after_incl.t (Wstat: 256 Tests: 0 Failed: 0)
Non-zero exit status: 1
Parse errors: No plan found in TAP output
t/xs/all.t (Wstat: 256 Tests: 0 Failed: 0)
Non-zero exit status: 1
Parse errors: No plan found in TAP output
t/xs/zip6.t (Wstat: 256 Tests: 0 Failed: 0)
Non-zero exit status: 1
Parse errors: No plan found in TAP output
Files=59, Tests=0, 2 wallclock secs ( 0.21 usr 0.13 sys + 0.90 cusr
+ 0.34 csys = 1.58 CPU)
Result: FAIL
Failed 59/59 test programs. 0/0 subtests failed.
make: *** [test_dynamic] Error 1
REHSACK/List-MoreUtils-XS-0.428.tar.gz
/usr/bin/make test -- NOT OK
//hint// to see the cpan-testers results for installing this module, t
+ry:
reports REHSACK/List-MoreUtils-XS-0.428.tar.gz
Running install for module 'Test::LeakTrace'
Checksum for /home/rg8239/.cpan/sources/authors/id/L/LE/LEEJO/Test-Lea
+kTrace-0.16.tar.gz ok
Configuring L/LE/LEEJO/Test-LeakTrace-0.16.tar.gz with Makefile.PL
Checking if your kit is complete...
Looks good
Generating a Unix-style Makefile
Writing Makefile for Test::LeakTrace
Writing MYMETA.yml and MYMETA.json
LEEJO/Test-LeakTrace-0.16.tar.gz
/home/rg8239/perl/bin/perl Makefile.PL -- OK
Running make for L/LE/LEEJO/Test-LeakTrace-0.16.tar.gz
cp lib/Test/LeakTrace/Script.pm blib/lib/Test/LeakTrace/Script.pm
cp lib/Test/LeakTrace.pm blib/lib/Test/LeakTrace.pm
cp lib/Test/LeakTrace/JA.pod blib/lib/Test/LeakTrace/JA.pod
Running Mkbootstrap for LeakTrace ()
chmod 644 "LeakTrace.bs"
"/home/rg8239/perl/bin/perl" "-Iinc" -MExtUtils::Command::MM -e 'cp_no
+nempty' -- LeakTrace.bs blib/arch/auto/Test/LeakTrace/LeakTrac
e.bs 644
"/home/rg8239/perl/bin/perl" "-Iinc" "/home/rg8239/perl/lib/5.30.3/Ext
+Utils/xsubpp" -typemap '/home/rg8239/perl/lib/5.30.3/ExtUtils
/typemap' LeakTrace.xs > LeakTrace.xsc
mv LeakTrace.xsc LeakTrace.c
gcc -c -fno-strict-aliasing -pipe -I/usr/local/include -D_LARGEFILE_
+SOURCE -D_FILE_OFFSET_BITS=64 -O2 -DVERSION=\"0.16\" -DXS_VE
RSION=\"0.16\" -fPIC "-I/home/rg8239/perl/lib/5.30.3/x86_64-linux/CORE
+" LeakTrace.c
rm -f blib/arch/auto/Test/LeakTrace/LeakTrace.so
gcc -shared -O2 -L/usr/local/lib LeakTrace.o -o blib/arch/auto/Test
+/LeakTrace/LeakTrace.so \
\
chmod 755 blib/arch/auto/Test/LeakTrace/LeakTrace.so
Manifying 3 pod documents
LEEJO/Test-LeakTrace-0.16.tar.gz
/usr/bin/make -- OK
Running make test for LEEJO/Test-LeakTrace-0.16.tar.gz
"/home/rg8239/perl/bin/perl" "-Iinc" -MExtUtils::Command::MM -e 'cp_no
+nempty' -- LeakTrace.bs blib/arch/auto/Test/LeakTrace/LeakTrac
e.bs 644
PERL_DL_NONLAZY=1 "/home/rg8239/perl/bin/perl" "-MExtUtils::Command::M
+M" "-MTest::Harness" "-e" "undef *Test::Harness::Switches; tes
t_harness(0, 'inc', 'blib/lib', 'blib/arch')" t/*.t
# Testing Test::LeakTrace/0.16
t/00_compile.t ..... ok
t/01_info.t ........ ok
t/02_refs.t ........ ok
t/03_count.t ....... ok
t/04_test_funcs.t .. ok
t/05_script.t ...... ok
t/06_threads.t ..... skipped: require threads
t/07_eval.t ........ ok
t/08_leaktrace.t ... ok
t/09_info_more.t ... ok
t/10_bad_use.t ..... ok
t/11_logfp.t ....... ok
t/12_padstale.t .... ok
t/13_do.t .......... ok
All tests successful.
Files=14, Tests=126, 3 wallclock secs ( 0.10 usr 0.04 sys + 2.10 cu
+sr 0.33 csys = 2.57 CPU)
Result: PASS
LEEJO/Test-LeakTrace-0.16.tar.gz
/usr/bin/make test -- OK
Running make install for LEEJO/Test-LeakTrace-0.16.tar.gz
"/home/rg8239/perl/bin/perl" "-Iinc" -MExtUtils::Command::MM -e 'cp_no
+nempty' -- LeakTrace.bs blib/arch/auto/Test/LeakTrace/LeakTrac
e.bs 644
Manifying 3 pod documents
Files found in blib/arch: installing files in blib/lib into architectu
+re dependent library tree
Installing /home/rg8239/perl/lib/site_perl/5.30.3/x86_64-linux/auto/Te
+st/LeakTrace/LeakTrace.so
Installing /home/rg8239/perl/lib/site_perl/5.30.3/x86_64-linux/Test/Le
+akTrace.pm
Installing /home/rg8239/perl/lib/site_perl/5.30.3/x86_64-linux/Test/Le
+akTrace/Script.pm
Installing /home/rg8239/perl/lib/site_perl/5.30.3/x86_64-linux/Test/Le
+akTrace/JA.pod
Installing /home/rg8239/perl/man/man3/Test::LeakTrace.3
Installing /home/rg8239/perl/man/man3/Test::LeakTrace::Script.3
Installing /home/rg8239/perl/man/man3/Test::LeakTrace::JA.3
Appending installation info to /home/rg8239/perl/lib/5.30.3/x86_64-lin
+ux/perllocal.pod
LEEJO/Test-LeakTrace-0.16.tar.gz
/usr/bin/make install -- OK
REHSACK/List-MoreUtils-0.428.tar.gz
Has already been unwrapped into directory /home/rg8239/.cpan/build/L
+ist-MoreUtils-0.428-4
REHSACK/List-MoreUtils-0.428.tar.gz
Has already been prepared
Running make for R/RE/REHSACK/List-MoreUtils-0.428.tar.gz
Warning: Prerequisite 'List::MoreUtils::XS => 0.426' for 'REHSACK/List
+-MoreUtils-0.428.tar.gz' failed when processing 'REHSACK/List-
MoreUtils-XS-0.428.tar.gz' with 'make_test => NO'. Continuing, but cha
+nces to succeed are limited.
cp lib/List/MoreUtils.pm blib/lib/List/MoreUtils.pm
cp lib/List/MoreUtils/PP.pm blib/lib/List/MoreUtils/PP.pm
cp lib/List/MoreUtils/Contributing.pod blib/lib/List/MoreUtils/Contrib
+uting.pod
Manifying 3 pod documents
REHSACK/List-MoreUtils-0.428.tar.gz
/usr/bin/make -- OK
Running make test for REHSACK/List-MoreUtils-0.428.tar.gz
PERL_DL_NONLAZY=1 "/home/rg8239/perl/bin/perl" "-MExtUtils::Command::M
+M" "-MTest::Harness" "-e" "undef *Test::Harness::Switches; tes
t_harness(0, 'blib/lib', 'blib/arch')" t/*.t t/pureperl/*.t t/xs/*.t x
+t/*.t
t/pureperl/after.t ................ ok
t/pureperl/after_incl.t ........... ok
t/pureperl/all.t .................. ok
t/pureperl/all_u.t ................ ok
t/pureperl/any.t .................. ok
t/pureperl/any_u.t ................ ok
t/pureperl/apply.t ................ ok
t/pureperl/arrayify.t ............. ok
t/pureperl/before.t ............... ok
t/pureperl/before_incl.t .......... ok
t/pureperl/binsert.t .............. ok
t/pureperl/bremove.t .............. ok
t/pureperl/bsearch.t .............. ok
t/pureperl/bsearchidx.t ........... ok
t/pureperl/duplicates.t ........... ok
t/pureperl/each_array.t ........... ok
t/pureperl/equal_range.t .......... ok
t/pureperl/false.t ................ ok
t/pureperl/firstidx.t ............. ok
t/pureperl/firstres.t ............. ok
t/pureperl/firstval.t ............. ok
t/pureperl/frequency.t ............ ok
t/pureperl/Import.t ............... ok
t/pureperl/indexes.t .............. ok
t/pureperl/insert_after.t ......... ok
t/pureperl/insert_after_string.t .. ok
t/pureperl/lastidx.t .............. ok
t/pureperl/lastres.t .............. ok
t/pureperl/lastval.t .............. ok
t/pureperl/listcmp.t .............. ok
t/pureperl/lower_bound.t .......... ok
t/pureperl/mesh.t ................. ok
t/pureperl/minmax.t ............... ok
t/pureperl/minmaxstr.t ............ ok
t/pureperl/mode.t ................. ok
t/pureperl/natatime.t ............. ok
t/pureperl/none.t ................. ok
t/pureperl/none_u.t ............... ok
t/pureperl/notall.t ............... ok
t/pureperl/notall_u.t ............. ok
t/pureperl/occurrences.t .......... ok
t/pureperl/one.t .................. ok
t/pureperl/one_u.t ................ ok
t/pureperl/onlyidx.t .............. ok
t/pureperl/onlyres.t .............. ok
t/pureperl/onlyval.t .............. ok
t/pureperl/pairwise.t ............. ok
t/pureperl/part.t ................. ok
t/pureperl/qsort.t ................ skipped: It's insane to use a pure
+-perl qsort
t/pureperl/reduce_0.t ............. ok
t/pureperl/reduce_1.t ............. ok
t/pureperl/reduce_u.t ............. ok
t/pureperl/samples.t .............. ok
t/pureperl/singleton.t ............ ok
t/pureperl/true.t ................. ok
t/pureperl/uniq.t ................. ok
t/pureperl/upper_bound.t .......... ok
t/pureperl/XS.t ................... ok
t/pureperl/zip6.t ................. ok
Can't locate List/MoreUtils/XS.pm in @INC (you may need to install the
+ List::MoreUtils::XS module) (@INC contains: /home/rg8239/.cpan/build
+/List-MoreUtils-0.428-4/blib/lib /home/rg8239/.cpan/build/List-MoreUt
+ils-0.428-4/blib/arch /home/rg8239/perl/lib/site_perl/5.
30.3/x86_64-linux /home/rg8239/perl/lib/site_perl/5.30.3 /home/rg8239/
+perl/lib/5.30.3/x86_64-linux /home/rg8239/perl/lib/5.30.3 .) a
t /home/rg8239/.cpan/build/List-MoreUtils-0.428-4/blib/lib/List/MoreUt
+ils.pm line 14.
BEGIN failed--compilation aborted at /home/rg8239/.cpan/build/List-Mor
+eUtils-0.428-4/blib/lib/List/MoreUtils.pm line 20.
I really need some expert guidance here! Thanks very much, Rick
-
Are you posting in the right place? Check out Where do I post X? to know for sure.
-
Posts may use any of the Perl Monks Approved HTML tags. Currently these include the following:
<code> <a> <b> <big>
<blockquote> <br /> <dd>
<dl> <dt> <em> <font>
<h1> <h2> <h3> <h4>
<h5> <h6> <hr /> <i>
<li> <nbsp> <ol> <p>
<small> <strike> <strong>
<sub> <sup> <table>
<td> <th> <tr> <tt>
<u> <ul>
-
Snippets of code should be wrapped in
<code> tags not
<pre> tags. In fact, <pre>
tags should generally be avoided. If they must
be used, extreme care should be
taken to ensure that their contents do not
have long lines (<70 chars), in order to prevent
horizontal scrolling (and possible janitor
intervention).
-
Want more info? How to link
or How to display code and escape characters
are good places to start.