Storage system address: 192.168.1.2
Storage system port: 443
HTTPS connection
1: ID = disk_dpe_0_0
Enclosure = DPE_0
Slot = 0
Name = DPE Disk 0
Health state = OK (5)
Health details = "The component is operating normally. No action is required."
Type = SAS
Capacity = 288196762624 (268.4G)
Rotational speed = 15000 rpm
User capacity = 236420176896 (220.2G)
Pool = performance
Current speed = 6 Gbps
Maximum speed = 6 Gbps
Manufacturer = SEAGATE
Model = STE30065 CLAR300
Vendor capacity = 322122547200 (300.0G)
Part number = 005049273
Serial number = 6SJ2C6MV
Firmware revision = ES0E
WWN = 06:00:00:00:05:00:00:00:00:00:00:00:00:00:00:03
2: ID = disk_dpe_0_1
Enclosure = DPE_0
Slot = 1
Name = DPE Disk 1
Health state = OK (5)
Health details = "The component is operating normally. No action is required."
Type = SAS
Capacity = 288196762624 (268.4G)
Rotational speed = 15000 rpm
User capacity = 236420176896 (220.2G)
Pool = performance
Current speed = 6 Gbps
Maximum speed = 6 Gbps
Manufacturer = SEAGATE
Model = STE30065 CLAR300
Vendor capacity = 322122547200 (300.0G)
Part number = 005049273
Serial number = 6SJ28QF3
Firmware revision = ES0E
WWN = 06:00:00:00:05:00:00:00:01:00:00:00:01:00:00:03
.......................many more similar lines.
####
########################
use strict;
use warnings;
use Data::Dumper;
########################
my $filename = "physical_disks.txt";
my $aoh_ref_physical_disks;
open my $fh, "<", $filename or die "Cannot open file $filename: $!";
while (<$fh>) {
#Do stuff here so that the following Array of Hashes is generated.
#Try later to put all the seperate next ifs into a single statement.
next if $_=~ /^Storage/;
next if $_=~ /^HTTPS/;
next if $_=~ /^$/;
my ($filekey, $filevalue) = (split /\s+=\s+/, $_);
#print "$filekey => $filevalue\n";
push @$aoh_ref_physical_disks, {$filekey => $filevalue};
}
foreach my $disk (1..$#$aoh_ref_physical_disks) {
foreach my $key (sort keys $aoh_ref_physical_disks->[$disk]->%*) {
#Add if loop here that checks if the key "Health status"
#is anything but ok or if the key "Health details" does not
#contain the word "normal", then print out the other details
#such as
#$aoh_ref_physical_disks->[$disk]->{'ID'}
#$aoh_ref_physical_disks->[$disk]->{'Health status'}
#$aoh_ref_physical_disks->[$disk]->{'Health details'}
#$aoh_ref_physical_disks->[$disk]->{'Model'}
}
}
#Use Data::Dumper output to verify.
print Dumper($aoh_ref_physical_disks);
##
##
C:\Users\pritesh\perlscripts>perl test.pl
$VAR1 = [
{
'1: ID' => 'disk_dpe_0_0
'
},
{
' Enclosure' => 'DPE_0
'
},
{
' Slot' => '0
'
},
{
' Name' => 'DPE Disk 0
'
},
{
' Health state' => 'OK (5)
'
},
];
#and so on.............
C:\Users\pugrankar\perlscripts>